Raymond WhitneyCorrugated metal fencing is popular, but you may be wondering how to assemble and frame it. Fences made of corrugated metal are becoming increasingly popular.
The cost is comparable to or less expensive than wood panels, but it will endure longer.
Galvanized or painted corrugated metal does not rust. Corrugated metal has a far longer lifespan than wood fences because it is impervious to the effects of the sun and moisture.
Metal fencing is another great option because it provides complete seclusion in your backyard.
There are many ways to use corrugated metal in your next fencing project; just let me know if there’s something you’d like to see.
We’ll review the pros and cons of installing it vertically and horizontally to ensure a long-lasting fence.
What is a Corrugated Metal Fence?
Using a metal or wood frames, the corrugated panels are fastened to the posts of the fence and held in place.
Metal fencing can be seen on residential, commercial, or agricultural properties.
They offer a high level of privacy.
When building a fence out of corrugated metal panels, on the other hand, you may want to think twice.
Fencing styles can range from modern to rustic or industrial, depending on the type of material used….
Types of Corrugated Metal Fencing
When it comes to fence panels, corrugated metal has gone a long way since the days of using old tin roofs. There are many colors and styles to choose from, just like wood.
Material that has alternating grooves and ridges is simply referred to as “corrugated.” When compared to flat metal, corrugated metal is much more durable. Metal roofing and fencing both use corrugated metal because of this.
Roofing and fencing can both benefit from corrugated metal panels. They come in a variety of thickness gauges, but 26-29 gauge is the most prevalent. roofing requires a thicker 26-gauge metal, while fencing requires 29-gauge metal.
Here are a few various types of fences made from corrugated metal, for your perusal.
Vertical Corrugated Metal Fence Frame
Instead of using fence pickets, you may use corrugated metal panels to create a more classic vertical fence. It is necessary to install three horizontal rails of 2x4s spaced 6-8 feet apart for a 6-foot fence.
For a more sturdy vertical panel fence, I prefer a post distance of 6 feet.
Using a 1-inch metal-to-wood screw through the flat part of the panel, attach each 6-foot panel vertically to each rail.
It’s simple to figure out how much material you’ll need if your panels are 3 feet wide because you’ll get 2 panels every 6 feet.
Make sure to hold the panels together where they meet at the overlap. The type of metal you use will determine whether you need to screw through the rib or if there is an additional flap to attach it on the flat side.
To link the two, I like to insert a screw just before the final rib. You don’t have to worry about keeping water out as you do with a roof.
Adding a 2×2 to the top and bottom of the bottom and top rails will give your vertical panels the same look as the one above. The 2×2 should be installed at the back of the 2×4. Using 2x2s as a template, attach the metal panels to the top and bottom rails.
You can cut all of your metal panels to the same height if you have a fairly even yard, making installation easy. You may, however, have to cut the bottoms of some panels if your yard is sloping.
Make sure the panels are long enough to accommodate your sloping yard when you order materials.
The fence frame will be the same as before, but the metal pickets will be installed in the same manner as the wood pickets.
Horizontal Corrugated Metal Fence Frame
For a contemporary look, horizontal fencing is the best option. Horizontal installation of corrugated metal fence panels is much simpler than vertical installation.
In order to frame your horizontal corrugated metal fence, there are a few major options.
Panels in between Posts
You can break up the metal with wood by using a corrugated metal panel in between your posts A 14 or a 16 between the posts can also be added to create a wooden border around the metal.
Posts should be spaced 6-8 feet apart for a 6-foot-tall fence. For heavier 26 gauge panels, I would only use 8-foot posts. Install your posts six feet apart if they are made of 29-gauge steel.
On the side of the 4 x 4 post that is aligned with the rear, install a 2 x 2 wood member Screws longer than 3 inches should be used to attach to the 4×4.
Using the distance between the top and bottom 4x4s, determine how much-corrugated metal panel you need to cut to fit the space between the two.
Install the bottom panel with the help of a 1-inch wood-to-metal screw against the 2x2s. Secure the top panel to the 2x2s by overlapping the ribs.
It’s time to install a 12 wood piece on top of the metal panel duplicating the 2×2, like the photo above.
You shouldn’t have to cut your panels if they are 3 feet wide for a 6-foot height horizontal fence. Because the metal panels are strong enough to span 6 feet, installing rails isn’t necessary.
Panels Over lapping 4×4
It’s possible to give your backyard fence a sleek metal effect by overlapping the 4x4s, which gives it a more contemporary appearance.
With no wood, our fence should endure longer because we plan to grow climbing jasmine all over it.
Install four-by-four posts every six feet along your fence’s full perimeter. Installing the panels for this design will necessitate setting them up first.
As a second person, fix the bottom corrugated metal panel in place on the first post and clamp it to the second post with a ratcheting tool. Keep the second post loose until the next panel is ready to be installed.
Make sure you’re holding both panels in place before attaching the first panel to the post. Placing a screw in the second or third flat portion of the metal panels is the quickest method.
To keep your screw in place, you may need to drill a pilot hole through both panels.
Having a second person on hand to hold the panels in place is essential. Installation of this fence style is the most difficult element of the process. Once the bottom panel is in place, move on to installing the top panel.
Installing the top panel is identical to installing the bottom panel. Make sure it covers the bottom panel at the correct rib. Verify that each panel is perfectly level before completing the final installation.
The corrugated metal panel may need to be cut at the end of the fence line. The cut side should be at the end.
2×2 on side of 4×4 post
An additional 2×2 will be required on the outside of your corner post. The metal panels on either side of the corner post will be able to be installed with this. Installing the 2×2 on either side or the back of your fence has no bearing on its strength.
Metal panels can be installed at 90-degree intervals along the fence’s backside, even with the rib height of the metal panels in the metal panel racks. Another option would be to use two 4×4 corner posts instead of just one.
An additional 2×2 will be required on the outside of your corner post. The metal panels on either side of the corner post will be able to be installed with this. Installing the 2×2 on either side or the back of your fence has no bearing on its strength.
Metal panels can be installed at 90-degree intervals along the fence’s backside, even with the rib height of the metal panels in the metal panel racks. Another option would be to use two 4×4 corner posts instead of just one.
How to Use Corrugated Metal For Fencing
Forget about spending hot summer days repainting or staining the wood fence after it cracked during the year’s first hailstorm or even worse, the days of fixing damaged vinyl fencing.
As for the rest of you, we prefer to spend our summer vacations boating or fishing rather than working on a dilapidated fence.
Conclusion
This brief how-to should help you put together a corrugated metal fence. You should be able to enjoy your metal fence for many years to come, regardless of whether the panels are installed horizontally or vertically.
